PSM-4900H
Home Up Feedback Contents

 

4900H Data Sheet

PSM-4900H Hybrid Satellite Modem

The PSM-4900H is Datum Systems' new low cost modem intended specifically to build low cost VSAT type small stations. It matches the performance and features of the PSM-4900, but connects directly to the L-Band output of an LNB to eliminate the normal receive downconverter equipment. The transmit uses a standard 70 MHz IF output eliminating the potential transmit problems of L-Band transmit systems. The PSM-4900H Satellite Modem is manufactured for System Integrators and is available with private labeling for volume customers.

This newly designed modem uses all of Datum Systems proprietary design technology implemented with the latest available parts to achieve the best performance and reliability possible at one of the lowest costs on the market. 

The PSM-4900H is a variable data rate programmable satellite modem with 70 MHz Transmit and L-Band Receive IF. This digital modem is programmable for either BPSK or QPSK operation and can be used in a wide variety of system configurations. The standard PSM-4900H includes integral Viterbi Forward Error Correction, programmable data interfaces and built-in 1:1 redundancy capability. It can be outfitted with a variety of options like an IBS Multiplexer with AUPC and a concatenated Reed-Solomon FEC codec and the new high performance Turbo Product Codes FEC . External interface converters are available for Ethernet and G.703 T1 or E1.

View the data sheet in HTML format here 4900H Data Sheet, or
Download/View the data sheet in Adobe Acrobat (PDF) format here  4900H PDF Download

Key Benefits

bulletLower cost than even the PSM-2100 or 512.
bulletPerformance within 0.3 dB of theoretical.
bulletNEW low cost, high performance Turbo Products Codes FEC available. See performance in Tech Note 6
bulletData rate programmable from 1200 bps to 4.92 Mbps in 1 bps increments.
bulletTransmit IF frequency programmable from 50 to 90 MHz in 1Hz increments. Optional 100 to 180 MHz IF Available.
bulletReceive IF frequency programmable from 950 to 1900 MHz in 1Hz increments. Optionally entering the LNB LO frequency allows setting directly at Receive RF frequencies.
bulletDSP for fast acquisition of 315 milli-seconds at 9.6 kbps QPSK, 196 milli-seconds at 16 kbps QPSK.
bulletAdded programmability for compatibility with virtually any equipment complement.
bulletEight user defined complete configurations can be stored and recalled.
bulletNew Programmable IBS Multiplexer and Reed-Solomon Codec available
bulletBuilt-in independent transmit and receive BERT.
bulletBuilt-in 1:1 redundancy capabilities and logic requiring only an external splitter/combiner (for RF) and a "Y" cable for data.
bulletControl via IrDA link on the front panel. 
bullet1 U rack mount unit with complete front panel and remote control.
bulletDesigned to accept newer interfaces and options, like Turbo Product Codes FEC and Ethernet Data Interfaces.

 

Send mail to Mike (at) datumsystems.com with questions or comments about this web site.
  Last modified: September 04, 2008