PSM-500L
Home Up Feedback Contents

 

M500L Data Sheet

PSM-500L Satellite Modem

The PSM-500L is the ultimate L-Band modem. Datum Systems designed this latest low cost modem specifically to build low cost VSAT type small stations. It matches the performance and features of the PSM-500, but connects directly to the L-Band input of a BUC and output of an LNB to eliminate the normal expensive transmit and receive converter equipment. The PSM-500L Satellite Modem is manufactured for System Integrators and is available with private labeling for volume customers.

This newly designed modem uses all of Datum Systems proprietary design technology implemented with the latest available parts to achieve the best performance and reliability possible at one of the lowest costs on the market. 

The PSM-500L is a variable data rate programmable satellite modem with L-Band transmit and receive IF. It is available in 3 firmware upgradeable feature sets, the M505, M511 and M520. The digital modem is programmable for either BPSK or QPSK operation and can be used in a wide variety of system configurations. The standard PSM-500L includes integral Viterbi and Reed-Solomon Forward Error Correction, programmable data interfaces and built-in 1:1 redundancy capability. It now includes as standard an IBS Multiplexer with AUPC, overhead channel(s) and Remote Modem Control. New options include a 16k Block high performance Turbo Product Codes FEC. External interface converters are available for G.703 T1 or E1.

The PSM-500L contains an internal 10 MHz reference for an LNB and BUC which may be individually enabled or disabled as required. It uses internal power for standard LNB (13 or 18 Vdc up to 500 mA), and a supplied external power source which plugs into the unit rear panel for various BUC requirements. The standard supplied BUC power supply is 24 Vdc at up to 4 A, options include 12 or 48 Vdc for specific BUCs. The internal ±1 x 10-8 high stability, low phase noise OCXO and Bias-T circuitry insures good BUC performance.

View the data sheet in HTML format here M500L Data Sheet, or
Download/View the data sheet in Adobe Acrobat (PDF) format here M500L PDF Download

Key Benefits

bulletMore "Bang for the Buck" than any L-Band modem on the market.
bulletFirmware Upgradeable to 8PSK/TCM and 16QAM Modulation modes.
bulletPerformance within 0.3 dB of theoretical.
bulletNEW low cost, high performance Turbo Products Codes FEC available. See performance in Tech Note 6
bulletData rate programmable from 1200 bps to 20 Mbps in 1 bps increments, depending on modulation and feature set installed.
bulletTransmit IF frequency programmable from 950 to 1750 MHz in 1Hz increments. Optionally entering the BUC LO frequency allows setting directly at Transmit RF frequencies.
bulletReceive IF frequency programmable from 950 to 1900 MHz in 1Hz increments. Optionally entering the LNB LO frequency allows setting directly at Receive RF frequencies.
bulletDSP for fast acquisition of 315 milli-seconds at 9.6 kbps QPSK, 196 milli-seconds at 16 kbps QPSK.
bulletAdded programmability for compatibility with virtually any equipment complement.
bulletEight user defined complete configurations can be stored and recalled.
bulletNew Programmable IBS Multiplexer and Reed-Solomon Codec are built in - standard on all units.
bulletBuilt-in independent transmit and receive BERT. The BERT can now serve as a DTE test set on the line side.
bulletBuilt-in 1:1 redundancy capabilities and logic requiring only an external splitter/combiner (for RF) and a "Y" cable for data.
bullet1 U rack mount unit with complete front panel and remote control.
bulletDesigned to accept newer interfaces and options, like Turbo Product Codes FEC and Ethernet Data Interfaces.

 

Send mail to Mike (at) datumsystems.com with questions or comments about this web site.
  Last modified: September 04, 2008